LHI FLIP32 OMNIBUS F3 V3 Flight Control gimbal MICRO Racing for QAV250 210 220 carbon frame
Click to see details
LHI FLIP32 OMNIBUS F3 V3 Flight Control gimbal MICRO Racing for QAV250 210 220 carbon frame
HTB1610uQpXXXXX_XFXXq6xXFXXXG
HTB1RSZ5QXXXXXa_aXXXq6xXFXXXR
HTB1VOJLQpXXXXaJXXXXq6xXFXXXS
HTB1mpNdQpXXXXahaXXXq6xXFXXXR
HTB1cOE_QXXXXXbOaXXXq6xXFXXXI
HTB1H3VnQpXXXXcVXFXXq6xXFXXXS
HTB18cMhNVXXXXarXFXXq6xXFXXXi
HTB1tbdtQpXXXXa0XFXXq6xXFXXXG
HTB1UrtcQpXXXXXlaXXXq6xXFXXXG
HTB1zHFeQpXXXXa3aXXXq6xXFXXXn
HTB1R
HTB1NrFQQpXXXXXcXXXXq6xXFXXXV

LHI FLIP32 OMNIBUS F3 V3 Flight Control gimbal MICRO Racing for QAV250/210/220 carbon frame of FPV Quadcopter/drone servo motor

100 % of buyers enjoyed this product!
Availability: in stock
TODAY'S DEAL Ends in : 04:36:18
Price :  $ 21.63 / piece
Sale Price :  $ 19.47 / piece
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Sort By

Top-rated Seller

Share :

FLIP 32 – F3 – OMNIBUS flight contorl

The Flip32 Omnibus flight controller uses the MPU6000 over SPI for the best possible flight performance. Along with the MPU6000 are a barometer and an AB7456 OSD chip (an upgraded MAX7456) for the BetaFlight integrated OSD. You won’t need a PDB with this build because there is a high performance 5v, 1.5a STMicrocontroller L78 voltage regulator, so you can plug the flight battery right into the flight controller.The Flip32 Omnibus flight controller the frist F3 flight controller with a MAX7456 OSD chip directly connected to the flight controller, so it can be configured from the BetaFlight configurator. A new generation AIO Flight control for FPV. Based on the F303 MCU and uses F3 MCU controls for OSD over SPI bus in DMA mode.

The Flip 32 OmnibusF3 flight controller is an integrated flight controller and OSD specifically designed for ease of use and outstanding flight performance. The MPU6000 inertial motion sensor was chosen for it’s high reliability, accuracy and update speed. This board has no problem running fast loop times and ESC protocols. There is an onboard barometer for altitude sensing along with an On Screen Display (OSD) chip directly connected to the main processor (MCU). This tight integration between the MCU and the OSD enables fast updates to the display and easy configuration of the OSD, which is managed straight from the BetaFlight configuration tool. You no longer need to worry about the extra hassle of configuring your OSD with a USB/UART adapter and 3rd party configuration tool, it’s all built into the flight control software.

The Flip 32 OmnibusF3 was designed to work specifically with BorisB’s amazing BetaFlight firmware. Boris is a control system expert and has implemented his own “ISA-PID compensator” based PID controller, called the BetaFlight PIDc, that gives an almost-predictive control for that super locked-in stick feeling. Download the BetaFlight configurator to flash and configure your quadcopter here: https://chrome.google.com/webstore/detail/betaflight-configurator/kdaghagfopacdngbohiknlhcocjccjao

Finally, for maximum ease of use, the Flip 32 OmnibusF3 has an onboard voltage regulator that can easily handle up to a 5s battery. No need to mess with a PDB, just plug your battery straight into the flight controller and you’re ready to go! Along with the robustly engineered power management system on the OmnibusF3, special precautions have been taken to ensure that the sensitive OSD chip is well protected, so you don’t have to worry about any problems with your OSD. even on 5s!

SPECIFICATIONS

  • STM32 F303 MCU, Runs Betaflight 3.0 firmware
  • SBUS/PPM input (Pinheaders)
  • 8PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
  • Only 36x36mm, mount holes 30.5×30.5mm
  • 128Mb Flash(16M Byte)
  • Barometer BMP280
  • IR Pins for race timing transponder
  • SPI Sensor MPU6000
  • SD Card slot
  • 2-4S Lipo Direct power

Finally, for maximum ease of use, the Flip 32 OmnibusF3 has an onboard voltage regulator that can easily handle up to a 5s battery. No need to mess with a PDB, just plug your battery straight into the flight controller and you’re ready to go! Along with the robustly engineered power management system on the OmnibusF3, special precautions have been taken to ensure that the sensitive OSD chip is well protected, so you don’t have to worry about any problems with your OSD. even on 5s!

To power the board you have two options. Either connect battery directly to BAT/GND or supply 5V on one of the ESCs connections. However you obviously want to have voltage display in your OSD so just connect BAT/GND to your LiPo (up to 4S).

To power your VTX and camera you have even more options. Out of the box RAM is not connected to anything. That leaves you with following alternatives.

Package including:

– one piece FLIP 32 – F3 – OMNIBUS flight contorl

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7  days
UPS Expedited 3 - 7  days
EMS 5 - 14  days
Post Air Mail Free Shipping 15 - 45  days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time Delivery If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category


Price :  $ 21.63 / piece
Sale Price :  $ 19.47 / piece
from AliExpress