Flash Deals
High Quality Matek 8 Bit WS2812B RGB 5050 Highlight LED For Naze32 CC3D For RC Quadcopter
Click to see details
High Quality Matek 8 Bit WS2812B RGB 5050 Highlight LED For Naze32 CC3D For RC Quadcopter
HTB1t34zHpXXXXX8XpXXq6xXFXXXi
HTB1lctzHpXXXXaIXpXXq6xXFXXXb
HTB1vyIfefJNTKJjSspoq6A6mpXa5
HTB1a
HTB10bEwi3oQMeJjy0Fnq6z8gFXaS
HTB1u8FkHpXXXXc3XVXXq6xXFXXX3
HTB1HCJxHpXXXXaFXpXXq6xXFXXXw
HTB1nEhpHpXXXXaQXVXXq6xXFXXXi
HTB1s7tuHpXXXXbAXFXXq6xXFXXXY
HTB1YMJzHpXXXXcQXXXXq6xXFXXXK
HTB13BpkHpXXXXa5aXXXq6xXFXXXS
HTB1LZ4tHpXXXXcZXFXXq6xXFXXXe

High Quality Matek 8 Bit WS2812B RGB 5050 Highlight LED For Naze32 CC3D For RC Quadcopter Raing Drone Spare Parts Accessories

100 % of buyers enjoyed this product!
Availability: in stock
Price:  $ 4.29 / piece
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Sort By

Top-rated Seller

Share:


Description:
Brand Name:Matek
Item Name:WS2812B RGB 5050 LED
Voltage: about 5V
Ports: Digital
Size: 51×10 mm
Platform: AVR, for arduino,Naze32 / CC3D Flight Control (need to brush CleanFlight)

Features:
Built-in controller chip, only need an IO port to control multiple LED
Chip built-in shaping circuit,signal distortion is not cumulative, stable display
Trichromatic 256 brightness adjustment, scan frequency is not less than 400Hz / S
Serial connection-level interface, through a signal line to finish receiving and decoding data
Both ends have interfaces (DIN DOUT) that can be cascaded
Will show the flight control lock / unlock,left and right aileron, brake, throttle, alarm and other status.

Note:
If it is used for Naze32 or CC3D flight control,it need to brushed CleanFlight, and using PPM receivers.

Used for CC3D flight controller,you should pay attention to the following points:
-CC3D need to brushed CleanFlight firmware.
-Using PPM / SBUS receiver, you don’t use PWM receiver.
-GND 5V DIN behind the lights should connected to CC3D fifth row – + S of the motor output side.
-Choosing PPM receiver in the CF’s assistant software configuration,then choose LED_STRIP options.
-Finally into the CF assistant software LED Strip Page to setup various states.

Package Included:
1x WS2812B RGB 5050 LED










Return:

If item DOA(Dead of Arrival),Buyers Can return it in 14 Days,We will Replace it with New item after we receive DOA item.Please Contact us Before you sent the item back

Warranty:
All item Comes with Basic 3 Month Sellers Warranty,if item defective in 3 Month,We will offer replacement withour extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month,Buyers can still send it back,We will contact suppliers or Manufactory for Warranty.Buyers Might Need pay the Shipping fee For resend the replaced item.

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category


Price:  $ 4.29 / piece
from AliExpress