Flash Deals
Free Shipping airplane Matek PDB XT60 Power Hub Power Distribution Board With BEC 5V And 12V
Click to see details
Free Shipping airplane Matek PDB XT60 Power Hub Power Distribution Board With BEC 5V And 12V

Free Shipping airplane Matek PDB-XT60 Power Hub Power Distribution Board With BEC 5V And 12V For FPV Multicopter

60 % of buyers enjoyed this product!
Availability: in stock
Price:  $ 4.98 / piece
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Sort By

Top-rated Seller

Share:

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power
from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos,
RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.It offers a XT60 socket to connect the LiPo pack conveniently.

Description:

Input voltage range (3S-4S LiPo operation): 9 – 18V DC

Regulated 5V and 12V outputs

LED power indicators ( 5V & 12V outputs )

6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:

Continuous current: 25A*4 or 15A*6

Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:

Designed for RC Receivers, Flight controllers, OSD, and Servos.

DC/DC synchronous buck regulator.

Voltage: 5.0 +/- 0.1VDC

Continuous current: 2 Amps (Max.2.5A 10s/minute)

Output Ripple: 40mV (VIn=16V, [email protected] load)

Short-circuit tolerant (5 seconds/minute)

BEC 12V output:

Designed for Video TX or FPV camera with linear regulator.

The battery should be 4S LiPo (13~18V DC)

Voltage: 12.0 +/- 0.3VDC

Continuous current: 500mA (Max.0.8A 5s/minute)

Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo:

Output voltage= 3S LiPo voltage -1V

Physical:

Dimensions: 36 x 50 x 4 mm (without XT60)

Mounting: 30.5 x 30.5mm, Φ3mm

Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Features:2oz copper, 4-layers &1.6mm PCB.Built-in XT60 SocketTotal 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant
Package included:
1 x Matek Systems PDB-XT60

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category


Price:  $ 4.98 / piece
from AliExpress