Emax Nighthawk Pro 280 FPV Mini RC Quadcopter Drone Frame with 700TVL Camera RTF
DESCRIPTION The Nighthawk Pro 280 was designed from the ground up to meet the exacting specifications of the Drone Racer. It comes fully tuned with the new Skylight 32 integrated flight control board with four 12Amp BLHeli One shot speed controllers. The power system consists of EMAX 2204 2300 kV motors and 6045 propellers mounted on a 10 degree tilt allowing greater forward speeds without sacrificing elevation. For the FPV racer, the Nighthawk Pro 280 includes a 700TVL camera with optional tilt mounts that allow you a perfect horizontal view in flight, and a 20W-200W video transmitter with a selectable switch, allowing you the option to choose the power output of your transmitter. It is without a doubt an exciting new quadcopter that captures the joy of quadcopter racing! Features: 1 Independent designed solid, durable and stable frame, centroid and center of gravity are same even battery installed 2 Prebuilt frame and extra accessories, Built with powerful EMAX power system and open source flight controller to ensure power and customizable (RTF model can fly after battery and propellers installed) 3 The sturdy copter frame has extensive flight test and endurance test. 4 Bright COB rear LED, different LED color can use distinguish copters when group flying (LED power consumption is 4W, which might decrease flying times.) 5 All in one design to combine ESC, BEC, and flight controller for easy installation and easy replacement. Plug and play motor, easy for swapping motor and no soldering needed. 6 Independent. Independent ESC and flight controller and power supply. ESC switch to perform single ESC calibration and boot pad to perform software and firmware upgrade. 7 Flight controller use 32bit ARM micro processor, fast process speed to ensure fast respond 8 Gyroscope, magnetometer, and accelerometer and barometer expansion port. With CPPM receiver GPS feature can be enable. (GPS module sold separately) 9 Support ANGLE, HORIZON, HEADFREE, MAG, HEADADJ …etc modes. 10 Support RC Input: standard signal, CPPM (PPM SUM) signal, PWM singal. 11 Low voltage monitoring and low voltage warning. (Buzzer sold separately) 12 Use EMAX 12A ESC, support open source BLHeli and ONESHOT feature; flight controller is based on NAZE32 Skyline32, support open source configurator Baseflight and Cleanflight 13 Extra power output and power output switch for LED expansion. Specifications: .Wheelbase: 280mm .Flight Weight: 440g(No Battery Included ) .Frame Size: 252mm*260mm*75mm .Package Size: 315*295*100 mm .Motor: MT2204(Customization Version) .ESC: BLheli 12A 4in1(Integrate on board) .Propeller: 6045 .Flight controller: Skyline32(Integrate on board) .FPV transmitter: 20MW/200MW .Antenna: 5.8G Clover 3 Blade Antenna Straight Connector .FPV Camera: 1/3-inch CMOS .Transmitter and Receiver Configuration Suggest: .Battery: 3S,1500-2200mAH 30C
All items will be shipped within 1~3 business days after payment. All items will be shipped with tracking number.
We always trying to provide the best service and reliable products for every Customer. We do appreciate your positive feedback with 5 star rating comments! Our system will leave feedback to you automatically after we receive your positive feedback.
We know that sometimes when order problems arise, it can be very frustrating, we are there with you every step of the way to make your experience more pleasant. Please feel free to contact us for solution, when you have any questions.
Please don’t open case or give us Neutral or Negative feedback directly (including low rating feedback) directly. Our work day is Monday to Saturday, we will assist you in any way possible and aim to answer all emailswithin 24 hours.
Warranty & Return:
1.If you are unsatisfied, you can return the item in original conditions (New, Never Used), then we give you the refund or replacement. Please bear in mind that postage costs are non refundable and any exchanges will incur an additional postage charge which lies with buyer.
2.If the item arrives at your door with apparent damage, please do contact us and take photo on it, we will replace the damage item.
3.If you can determine that a product is defective before using it, we may be able to accept it back for exchange or refund. however, you must contact us firstly.
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
5.8G FPV 2W 12 Ch 2000mW Wireless Audio Video Transmitter AV Sender+ RC5808 Receiver Kit
24cm Batman Spider Man Glove PVC Action Figure Spiderman Launcher Toy Batman Cosplay Kids Toy Original box Brinquedos gift
$ 9.45 / piece
saint seiya myth cloth “IN-STOCK “Galaxy model Cygnus Huyga saint seiya Bronze cloth myth new EX 2.0 gold saint Free shipping
$ 26.99 / piece
Wholesale 324pcs/lot English Pokemon Playing Cards Poker Card Trading Card EX card Pokemon Toys Of Classic Free Shipping
$ 24.88 / piece
Free shipping saint seiya myth cloth body AE/TZ Gemini body accessories saint seiya PVC action figure seiya Cloth Myth
$ 21.90 / piece
1pcs Dismantled device Accessories Kid Baby Toy Mini Figure Building Blocks Sets Model Toys Minifigures Brick
$ 1.99 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.