Name: Smoothieboard MKS SBASE V1.3 Packing List 1pcs * MKS SBASE V1.3 1pcs * USB Features
- Support highly modular open source firmware Smoothieware. Easy to edit config.txt file. No complicate firmware editing necessary.
- Fully supports network functionality. Besides the regular USB connection an Ethernet network cable can be connected directly to a network for browser control. Board IP address can be configure in config.txt.
- Setcurrent directly on config ,protect driver or potentiometer from getting burned when adjust the current.
- This circuit board with high-quality 4-layer and better heatsink.
- Using a dedicated power supply chip, stably ensure power output.
(Please note that MKS SBASE can’t work with OLED12864 and LCD2004 display.)
More features as following
MKS SBASE Size
MKS SBASE PIN
How to use
1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
. Need to change config name .
.2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.
4.Plug the SD card to the board, after power on, it will automatic update .
5.If connect computer with USB, need to install the driver (Refer to below specification ).
Install the Driver
First, you should upload the zip file.
Then, plug the USB to computer . Next, enter device manger .
Then will turn up COM after install successfully.
Download Firmware and Update
Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .
After successful updated, the file name will turn into firmware.cur.
How to Adjust Driver Current. Caution! Please mind the power polarity and drivers direction. Please don’t put the drivers or motors on/off while power on. Please disconnect all motors when adjust driver current. A4988(1amp) I= vref /1.6,default Vref 1.6V and 0.5A,Max1.0A. A4988(2amp) I= vref /0.8,default Vref 0.8V and 1.0A,Max2.0A. DRV8825 I= vref *2, default 0.65A and 1.3A,Max 2.5A. LV8729 I= vref /0.5, default 0.4A and 0.8A,Max 1.5A. Following picture shows how to check the Vref.
If one of your mainboard or LCD is not produced by Makerbase or from us,
please make one connecting terminal refer to following way.
In order to ensure you receive you order tax free upon import,we will declare it
with a lower value. This lower price does not reflect the total price you paid or the market value of the product and may not apply to countries with different tariff rules.Any import charges or fees are the buyer’s responsibility.
1.If you are not satisfied with your purchasing for any reason,you can return the item to us,please send message to us before return.
2.It must be returned within 14 days,return shipping fee will be paid by buyer.
3.Once we get the item,we will exchange or rufund your money,but not including shipping&handing and insurance fee.
1.Please do leave us positive feedback if you are satisfy with our item and service!
2.Please contact us before leaving any negative or neutral feedback.Our aim is to provide Top Level Customer Service, we will work with you to solve any problems.
Thank you for viewing and your support!
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
BL touch auto bed leveling sensor heating bed level sensor TL touch leveling probe heater inductive bed sensor to FDM 3d printer
$ 18.00 / piece
MKS TFT32 V2.0 touch screen 3D Printer splash lcds smart controller display RepRap TFT monitor support wifi/BT
$ 32.90 / piece
MKS Smoother filter stepper eliminator texture smoother filter addon module for RepRap stepper driver motor
$ 3.00 / piece
3D printer controller motherboard MKS SBASE V1.3 32-bit ARM Cortex for Smoothieware integrated Microcontroller open source
$ 49.00 / piece
Tablet PCI Motherboard Analyzer Diagnostic Tester Post Test Card for PC Laptop Desktop PTI8
$ 15.69 / piece
Universal Adjustable Portable Foldable Metal Non-slip Holder Stand for ipad2/3/4/mini PC Tablet Laptop Notebook
$ 4.97 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.