Flash Deals
32bit ACRO NAZE32 BRUSH Brushed Base Flight Control Plate In Naze32 For DIY Micro FPV Frame
Click to see details
32bit ACRO NAZE32 BRUSH Brushed Base Flight Control Plate In Naze32 For DIY Micro FPV Frame

32bit ACRO NAZE32_BRUSH Brushed Base Flight Control Plate In Naze32 For DIY Micro FPV Frame

100 % of buyers enjoyed this product!
Availability: in stock
TODAY'S DEAL Ends in: 04:36:18
Price:  $ 12.74 / piece
Sale Price:  $ 11.59 / piece
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Sort By

Top-rated Seller

Share:

USD 126.65/bagUSD 92.65/pieceUSD 185.99/pieceUSD 37.74/lotUSD 55.99/pieceUSD 71.65/pieceUSD 158.88/pieceUSD 78.66/piece

Lighting Hobby

32bit ACRO NAZE32_BRUSH Brushed Base Flight Control Plate

In Naze32 For DIY Micro FPV Frame

description:
Item Name: ACRO NAZE32_BRUSH Flight Control
Dimension: 22mm * 32.5mm
Thickness: 1.2mm
Weight: 3g

characteristics:
1. NAZE32_BRUSH is in the revision based on NAZE32 flight control, it is a 32bit controller brush base in NAZE32 firmware.
2. The flight control support 1 S (4.2 V) and 2 S (8.4 V) power supply, 2 S power can bring flying experience more violence.
3. Design of circuit structure Independent, comes with pressure reduction technology, whether it is 1 S or 2 S power input, UART1 / 2 5 V output, UART3 output 3.3 V
4. With a large current NMOS transistors, operating current up to 10A or more.
5. Support for PPM, SBUS, DSM receiver input signal.
6. With battery voltage detection interface and audible alarm.
7. In support of the world almost all hollow canopy engine, including 1020 coreless motor. Support 6 engine.

Notice:
Before applying power, pay attention to battery voltage selection.
The default send is 1 S (4.2 V); When using 2 S, you first need to disconnect the short contacts 1 S, and then place the two pads on the 2 S.
Prohibit short together the three pads at the same time.
Receiver configuration:
1. Receiver welded directly to the DSM DSM interface of 3.3 V, GND, RX3, in the software configuration CF UART3 for
RX series, and change the Receiver mode to RX_SERIAL, and then configure the receiver tag with Spektrum1024 or 2048.
2. SBUS receiver welded on the UART2 interface. SBUS signal in CF UART2 for Software Configuration Series
RX, and change the Receiver mode to RX_SERIAL, and then configure the receiver tag with SBUS.
3. Welded in PPM interface PPM receiver. No need to open RX Series, only in CF software to change the
Receiver mode for RX_PPM.

Package Included:
1 x Flight Control Plate ACRO NAZE32_BRUSH

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category


Price:  $ 12.74 / piece
Sale Price:  $ 11.59 / piece
from AliExpress