2 string 10A high current lithium iron phosphate battery protection board, two 6.4V Power tool Aeromodelling protection board
Features: (1) high-accuracy voltage detection circuit; (2) Connect the charger terminals using high-pressure devices; (3) Built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2 and load short-circuit); (4) through the MOS transistor control the battery charge and discharge; (5) Low standby current consumption. Purpose: · Two strings iron phosphate lithium-ion rechargeable battery pack; & Technical parameters: No. Test items Standard A voltage Charging voltage DC: 7.2V CC / CV Single equilibrium voltage 2 Current Balance current for single Single drain the battery (consumable) ≤ 6uA Maximum continuous discharge current 7A 3 Overcharge Protection Overcharge detection voltage 3.65V Accuracy ≤ ± 0.025V Overcharge detection delay time 1s Overcharge recovery voltage 3.45V Accuracy ≤ ± 0.025V 4 Over-discharge protection Over discharge detection voltage accuracy ≤ ± 0.1V 2V Over discharge detection delay time of 128ms Over-discharge recovery voltage 2.5V Accuracy ≤ ± 0.1V 5 Over Current Protection Over current detection voltage accuracy ≤ ± 30mv 200mv Current 26A overcurrent detection accuracy ≤ ± 4A Overcurrent detection delay time 12ms Restore state auto-recovery 6 external short circuit protection detection state Detection delay time ≤ 50us Restore state auto-recovery 7 internal resistance protection circuit (MOSPET) ≤ 11mΩ 8 Temperature Operating temperature range -40 ~ +50 Storage temperature range -40 ~ +125
Product wiring diagram
· B + battery pack connected to the positive; · MB battery 1 and battery 2 pick the middle of the contacts; · B-connected to the negative terminal of the battery pack; · P + connection charge / discharge upright pole (charging terminal / discharge side shared); · P-connection charge / discharge end of the negative (charging terminal / discharge side shared). Note: 1 Please note that input and output voltage, and load current conditions of use, the power consumption of the protective plate does not exceed the allowable power dissipation specifications; (2) may occur when connecting the battery can not discharge the case, in this case, the connection charge can be restored to normal operation; 3 battery overcharge and over discharge the battery case of mixed state becomes filled with over-discharge state, it is impossible to charge and discharge; (4) The protection board ESD protection circuitry built though, but please do not apply to the protection board protection plate circuit performance over excessive static electricity.
Lithium battery protection board X10
• All the items will be dispatched within 2 business days after your payment is clear.
• Note: China Post Air Mail/Parcel just belongs to worldwide post system which is much slower
than Special Delivery. Items will arrive in 7-25 business days to worldwide usually. And the
arrival time also depends on some factors and different areas. The general arrival time table is
shown below for your inference:
• If the item is defect when you receive it or you are not satisfied with it, please return it within
14 days for a replacement or money back. But the items must be back in factory condition.
Please contact us in advance and double check the return address before you return it.
• If item is defective in 3 months, we could send you a new replacement for free or offer full refund
after we receive the defective item.
• If item is defective in 12 months, we could also offer you replacement service, but you have to
pay for the extra shipping expenses.
• Our aim is to provide Top Level Customer Service, and our customer service specialists are
always standing by to solve any of your problem. We greatly appreciate your 5-STAR POSITIVE
feedback and please do NOT leave negative feedback without asking for help.
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
5.8G FPV 2W 12 Ch 2000mW Wireless Audio Video Transmitter AV Sender+ RC5808 Receiver Kit
24cm Batman Spider Man Glove PVC Action Figure Spiderman Launcher Toy Batman Cosplay Kids Toy Original box Brinquedos gift
$ 9.45 / piece
saint seiya myth cloth “IN-STOCK “Galaxy model Cygnus Huyga saint seiya Bronze cloth myth new EX 2.0 gold saint Free shipping
$ 26.99 / piece
Wholesale 324pcs/lot English Pokemon Playing Cards Poker Card Trading Card EX card Pokemon Toys Of Classic Free Shipping
$ 24.88 / piece
Free shipping saint seiya myth cloth body AE/TZ Gemini body accessories saint seiya PVC action figure seiya Cloth Myth
$ 21.90 / piece
1pcs Dismantled device Accessories Kid Baby Toy Mini Figure Building Blocks Sets Model Toys Minifigures Brick
$ 1.99 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.