Dual BEC X Type
The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 4 layers PCB.
It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8.
The BEC 12V is linear regulator, no LC Filter needed.
Built-in STOSD8 can support Plug & Play, no complicated settings needed.
It is specially made for the mini FPV Quad.
In: 8-21VDC (3-5S LIPO)
PDB: 4 X 30A (MAX. 4 x 35A)
BEC: 5V/2A, 12V/0.
Size: 51 x 35 x 4mm/2 x 1.38 x 0.16 inch
Package size: 146 x 90 x 5mm
Net weight: 15g
Package weight: 21g
PDB: (ESC outputs)
Continuous current: 30A per output
Peak current (10 seconds/minute): 35A per output
2oz copper, 4-layers &1.6mm PCB.
1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
1x Serial port (RX, TX, G)
Mounting holes 30.5mm square spacingΦ3mm
BEC 5V (outputs)
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, [email protected] load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V (outputs)
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4-5S operation)
Continuous current: [email protected] IN, [email protected] IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage – 1V
If current >140A. STOSD display 140A
1) Running indicator
Blue LED blinks: STOSD is initializing
Blue LED light: STOSD is working.
2) Autodetect PAL/NTSC
Auto sense PAL / NTSC cam at OSD startup. Default is NTSC without Cam signal
3) Dynamic on screen info
Current < 2A & keep 5 seconds
Current > 2A
4) Min.Volt & Max.Amp recorder
5) Automatic flight timer
Current > 2A, Time in.
Current < 2A,Time out.
6) Auto battery cells detection
If the Input voltage is in the range of following, The HUBOSD will detect the cell
11.1-13.05V: 3cells LiPo, 14.8-17.4V: 4cells LiPo, 18.5-21V: 5cells LiPo
If the input voltage is out of the range. The voltage value will blink on screen.
Pls check if the battery total voltage is below 3.7V*cells
7) Low vlotage alarm
(Value blinks): Default 3.6V* cells
8) Exceeding mAh alarm
(Value blinks): Default 1000mAh
9) Onscreen Pilot ID
Default is disable. you can type some words & enable it in GUI
10) Firmware upgradable
Voltage precision: +/- 0.4%, Voltage resolution: 0.01V
Current precision: +/- 1.5%, Current resolution: 0.1A
1 x Dual BEC OSD Distribution Board
1 bag of accessories
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
5.8G FPV 2W 12 Ch 2000mW Wireless Audio Video Transmitter AV Sender+ RC5808 Receiver Kit
24cm Batman Spider Man Glove PVC Action Figure Spiderman Launcher Toy Batman Cosplay Kids Toy Original box Brinquedos gift
$ 9.45 / piece
saint seiya myth cloth “IN-STOCK “Galaxy model Cygnus Huyga saint seiya Bronze cloth myth new EX 2.0 gold saint Free shipping
$ 26.99 / piece
Wholesale 324pcs/lot English Pokemon Playing Cards Poker Card Trading Card EX card Pokemon Toys Of Classic Free Shipping
$ 24.88 / piece
Free shipping saint seiya myth cloth body AE/TZ Gemini body accessories saint seiya PVC action figure seiya Cloth Myth
$ 21.90 / piece
1pcs Dismantled device Accessories Kid Baby Toy Mini Figure Building Blocks Sets Model Toys Minifigures Brick
$ 1.99 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.